Knowledge Down
发布时间: 2016 - 05 - 10
2000 km for a new motorbycle in Running-in period.For a new motorbycle,within the first 1000km,speed should not be more than 50 km/h,for the first 1000km to 2000km,speed should not be more than 80km/h.
发布时间: 2016 - 04 - 19
发布时间: 2016 - 04 - 08
The oil changeFor a new motorbycle,within the first 1000km,speed should not be more than 50 km/h,for the first 1000km to 2000km,speed should not be more than 80km/h.
发布时间: 2012 - 06 - 08
Clean air filterAir filter maintenance: motorcycle driving after a period of time, will accumulate a lot of dust and foreign bodies in an air filter element, the filter surface will also be dustproof, make filter hole blockage, the volume resistance increases, resulting in a rich mixture. So for every 1500-3000 km driving should be a filter cleaning, cleaning when you want to, according to different cleaning by the filter material such as foam filter, please gently will immerse in kerosene in a clean, remove dust and foreign bodies, then add oil in foam filter and squeezing and dry, let the oil bubble microstrip installation; Such as paper filter, please brush away the surface dust, high pressure gas again from the inside to outside, blowing dust in order to achieve purpose. Air filter maintenance:Air filter maintenance: motorcycle
发布时间: 2012 - 06 - 07
Maintenance and adjustment of the carburetorMaintenance and adjustment of carburetor: because have been adjusted when delivery from factory, please do not adjust easily, if you need adjust, please after the engine preheating, adjust again. Adjust the idle speed screw, idle speed increased clockwise, counterclockwise idle speed is reduced, its value is commonly 1450 r/min, such as failure of carburetors, please you to check repair station or store for repair.
发布时间: 2012 - 06 - 05
Drive chain of the maintenance and adjustmentDrive chain of the maintenance and adjustment: due to large chain force, lubrication condition is bad, in use due to wear and permanent deformation and elongated, if not timely adjustment will cause an accident. Therefore shall regularly check, maintenance and adjustment. Maintenance period is generally above 300 km, the chain must be lubricating oil, 500 km to 800 km drive chain can be removed soaked in gasoline to clean. Chain adjustment method is: after unscrew the wheel nut, according to the adjustment of the same quantity to turn the regulator, the regulator should be in the same on both sides of the requirements about scale, check the chain of jacaranda tightness is in line with the requirements (chain is set up and down momentum within 10-20 mm).
17页次1/3首页Previous123Next尾页
Copyright ©2005 - 2013 Zengcheng Benma Industrial Co. Ltd.
犀牛云提供企业云服务